Skip to content
See Our Machine Tool Accessories and Solutions

BAR FEEDERS

AUTOMATION (8)

Drive Productivity & Efficiency

ATS Bar Feeders enable machine operators to spend time on production, rather than having to worry about stock.

  • Industry-leading 3 year warranty!
  • Bar Feeders that will increase productivity by up to 50%
  • Run lathes unattended through breaks, evenings, and weekends
  • Provides simple, quick-changeover, low-cost automation
  • Over 10K units in the field

Run Lights Out

INDUSTRY LEADING FEATURES

Blue Star

  • Easy to Use

    • Systems are easy to read and easy to use
    • One-screen setup that significantly reduces setup time
    • Alarms are displayed in an understandable format.
Red Star

  • Reliability by Design

    • 100% Electrical Operation
    • Two or Three servo motors run it all!
    • Proven Mechanical Design
    • Soft reload process eliminates shock, vibration, and noise
    • 90% of bar stock mass is below bar centerline for maximum rigidity and balance
Dark Blue Star

  • Productivity & Efficiency

    • Simple Setup with All Lathes
    • "Quick-setup wizard" prompts entry of 5 parameters in plain English
    • Store 250 part setup programs for repeat jobs
    • Bar feed automatically makes all mechanical adjustments for bar diameter and workpiece length
3-Jun-06-2022-06-55-28-87-PM

ML3 SERIES BAR FEED

MODELS ML3-565 ML3-580 ML3-595
Min/Max Bar Diameter (inches) 0.2" - 2.56" 0.2" - 3.13" 0.2" - 3.75"
Max Bar Length (inches) 60"
Max Stroke (inches) 65"
Approximate Changeover Time Up to 2 minutes + spindle liner change
Materials Tray Capacity, 1” Diameter Bars 25 Bars
Weight Net / Gross lbs. 850/1260
Reloading Driven by Electric Motor
Feeding Driven by 400W Servo Motor
Feeding Method Feed to Turret, Serve Feed, Sub-Spindle Pull

MD SERIES BAR FEED

MODELS MD-565 MD-580 MD-595 MD-12.102
Min/Max Bar Diameter (inches) 0.2" - 2.56" 0.2" - 3.13" 0.2" - 3.75" 0.5" - 4"
Max Bar Length (inches) 60" 72"
Max Stroke (inches) 65" 80"
Approximate Changeover Time Up to 2 minutes + spindle liner change
Materials Tray Capacity, 1” Diameter Bars 25 Bars
Weight Net / Gross lbs. 850/1260
Reloading Driven by Electric Motor
Feeding Driven by 400W Servo Motor
Feeding Method Feed to Turret, Serve Feed, Sub-Spindle Pull
*Feeding tolerance: Servo =/-0.004” subject to bar condition and workholding. Feeding to turret & sub-spindle pull governed by lathe accuracy (+/-0.0005” typical)